Category Archives: Announcement

NEW VERSION FOR SMARTIDPLUS

Dear all,

A new version 1.4.1 is available at messec.

Due to the fact that this sw needs to modify some changes in the original sw structutre, complete new image is necessary to be installed.

For this reason we are supplying the new image with the instructions on how to install it into your system.

Please make sure to read these instructions before you start the upgrade process.

Download the instructions here 

This version includes several improvements in image uploading and sorting.

For more information check the release notes.

Do not hesitate to contact us if you have any question.

NEW LIVEUPDATE VERSION FOR CLICK 120

Dear all,

A new version v4.2.1 is available at MESSEC

How to update:

  1. Download the file and copy it in a USB pen drive.
  2. Connect the USB pen drive in a USB port of your Click
  3. Extecute the LiveUpdate shortcut on your Click and follow the steps

This version includes photo ID service and other improvements.

For more information check the release notes.

Do not hesitate to contact us if you have any question.

NEW MAC DRIVERS AVAILABLE

The new drivers for the latest macOS version are available for the following printers here:

  • CP-M1E (v 1.0)
  • CP-D90DW-P and CP-D90DW (v 3.0)
  • CP-D80DW (v 2.0)
  • CP-K60DW-S (v 4.0)

The driver for the CP-D70 is still under development. (Coming Soon).

This drivers are supported on macOS 10.11* up to 10.15 Catalina.

Do not hesitate to contact us if you have any question.

*Versions older than 10.11 are not guaranteed to work. If you have a previous version, please update your mac.

New version for SmartPhotoPrinter

Dear all,

A new version v1.6.0.0 is available at MESSEC.

With this version you can update the following devices: SmartD90EV, SmartD90RT.

How to update:

  1. Download the file
  2. Copy the downloaded “SP_v1600.zip” file in a USB pen drive under the route:
    • root:// SmartpUpdate/SP_v1600.zip
  3. Switch off the SmartD90
  4. Attach the USB pen drive to a free USB SmartD90 port
  5. Switch on the SmartD90 and wait for about 10 min (the SmartD90 will power off automaticaly when it finnish)

This version includes:

For SmartD90EV:

  • Main software v1.6.0.0
  • Hashtag v2.0

For SmartD90RT:

  • Main software v1.6.0.0
  • Hashtag  v2.0
  • PhotoPrintME v2.0
  • ID software v1.3.3

For more information check New Specs